14-05-2021

Inpa 7.2.0 Software Download

BMW Standard Tools is the software suite distributed by BMW Group that contains several interoperating applications and drivers, including NCS Expert, WinKFP, NFS, INPA, Tool32, and others. Here is the free download link for V2.12.
Hardware:

BMW INPA Ediabas 5.0.2 download, inpa 5.06 download, inpa 6.4.7 download hereand install it on Windows XP/ Vista or Windows 7/ 8/ 10 (32bit or 64bit), to get it work with K+DCAN USB cable. Running inpa software on BMW E46, E90. INPA on BMW E46. Purpose: reset BMW E46 airbag light. September 5, 2017 auto Auto Software Download & Installation 0 BMW Standard Tools – The software suite distributed by BMW Group that contains several interoperating applications and drivers, including NCS Expert, WinKFP, NFS, INPA, and others. BMW INPA 5.0.6 download here, which is tested without issues to work with K+DCAN usb cable with inpa bmw e46 and inpa bmw e90. INPA v5.0.6 download. You’re advised to use INPA software on Windows XP, tested by professional engineers at uobdii.com. Bmw inpa windows 7 and bmw inpa windows 10 need luck.

A PC (Operating system: Win XP 32 bit /VMware Win 7 32 or 64 bit)

Software Download Windows 10

An INPA/EDIABAS K+DCAN USB Diagnostic cable (cheap €19 in eobdtool.co.uk)

Inpa 7.2.0 Software Download

How to set up BMW Standard Tools 2.12?
Step 1: Download BMW Standard Tools 2.12
Download here and install follow system prompts:
Step 2: Download and install INPA
http://www.maxdown.org/download.php?file=BMW%20Inpa/Ediabas%20v5.06&host=b
Step 3: Download and install NCS Expert ENG
Make sure your EDIABAS should already be configured to STD:OBD for use with INPA
cable. Download EDIABAS configurator here:
This tool (in C:EDIABASEdiabas-Konfiguratorfolder) allows
you to easily change the ediabas.ini to your desired interface. So if you are
switching from INPA to E-Sys you could use this to switch from STD:OBD toENET.
Inpa
Set COM port for INPA cable
Connect the INPA DCAN cable with PC Install device deriver Come to My Computer>>Device Manager>>Ports (COM&LPT)
In this case it’s COM5. We need to change this in the obd.ini file located
in the c:ediabasbin folder.
Right click on your INPA cable driver for example mine is labeled “USB Serial Port” and click on properties. Now in the property window click on the advanced tab.
Now every driver is different but the important part is the settings such as latency timer and received and transmit bytes. See pic bellow for the ideal settings. You may also change the COM port number here as well for tutorial I left it at 5. Once your changes are done we can proceed by clicking OK to accept the changes. No close all windows to return to the desktop.
Browse to C:EDIABASBIN and find file obd.ini and
open it with an editor (e.g Notepad)
First 3 lines will look like this…
[OBD]
Port=Com1
Hardware=USB
Need to change the Port to reflect our INPA cable which in our case
is COM port 5. So change it to look like this…
[OBD]
Port=Com5
Hardware=USB
NOTE: Remember which USB port you connected your cable to as plugging it into a different USB port will allocate the INPA cable to a different COM port and neither tool will see the cable until the original USB port is used again or changed in device manager and obd.ini as mentioned above.Now to test if your cable installed correctly. Plug it into the vehicle’s OBD port and open
INPA.
Step 6: SPDATEN Files
Download and install SPDaten files (always recommend the latest) in this case it is 50.2 until I finish zipping and upload SPDatens 51.0 and upload it to share. (Follow the instructions provided at the end of the blog labeled “How to start WinKFP” which will explain how to import the SPDaten files to WinKFP)
Once downloaded you can now
**EDITED 10-12-2013**
For NCSExpert to install or update the daten files, copy the files from SP-daten-E##daten to
the C:NCSEXPERDATENE## (where E## is whatever chassis you’re
updating). You will also want to copy the files from SP-daten-E##SGDAT to C:NCSEXPERSGDAT (they’re not separated into different chassis in NCS Expert, so you just want to copy and paste everything to that directory. Overwrite everything it asks about). Then copy the files from SP-daten-E##ECU to C:EDIABASECU
After copying the daten files to
c:NCSEXPERDATENE## copy the following files to the following locations:
copy C:NCSEXPERDATENE##*.000
C:NCSEXPERDATEN
copy C:NCSEXPERDATENE##*.DAT C:NCSEXPERDATEN
copy C:NCSEXPERDATENE##*.ASC C:NCSEXPERDATEN
2. After installation the directory (Drive letter):EC-APPSNFSSGDAT contains file CABI.h only, and doesn’t contains files, required for working.
3. Mount the Progman disk in virtual drive (or insert in usual DVD-drive), extract all files SP-daten-Exx.rar from directory (Drive letter):CIP-Installerbin, each one in its own directory.
(You must get directories like SP-daten-Exx)
4. Now copy all *.IPO files from every directory (Drive letter):SP-daten-Exxsgdat to directory (Drive letter):EC-APPSNFSSGDAT.
For this purpose better use Total Commander, it allows to overwrite elder files
with newest. This directory now looks like this:
5. In the same way refresh directory (Drive letter):EDIABASEcu with files taken from (Drive letter):SP-daten-Exxecu 6.
Run WinKFP
Download
7. Choose “Import/Export – Import – Assemly line data” and import all data needed from directories (Drive letter):SD-daten-ExxDATA Details how to import assembly line data are given
in official manual for WinKFP
8. After importing the data, copy all files from directory (Drive letter):SD datenE70DATAgdaten to directory (Drive letter):EC-APPSNFSDATAGDATEN, overwriting all existing files.
Note: If you use Progman v.30 for updating WinKFP, it has error in file GDATENSgidc.as2. Simply open this file with Notepad and delete line 165.
WinKFP is ready for programming
ICOM for BMW ISIS ISID A+B+CPlus V2014.06 External HDD Support Multi-language

Bmw Inpa software download, free

2.
Inpa

Inpa 7.2.0 software download, free

3.

Software Download Sites

Related Post: