Autocad Type Commands
Change shortcut command is very important, so how to edit shortcut command in AutoCAD. There are two ways: find acad.pgp file and edit; use Command Alias Editor. All AutoCAD commands can be typed in at the command line. Commands have shortcut keys that can enter shortcut command or type command sentence. Commands have shortcut keys that can enter shortcut command or type command sentence. How to restore command line or bar in AutoCAD 2014 2. Show missing command Line / bar using Keyboard. Some times it happens that command is there but it gets disappear from the screen. So you can type command through the keyboard and it will reappear. You just have to simply type the command COMMANDLINE using the keyboard.
Despite its limitations, the TEXT command in AutoCAD 2014 is useful for labels and other short notes for which mText (multiline) would be overkill. The following steps show you how to add text to a drawing by using AutoCAD’s TEXT command.
The TEXT command doesn’t use a dialog box, fancy formatting toolbar, or contextual Ribbon tab, like the mText command’s In-Place Text Editor. You set options by typing them on the command line or in the Dynamic Input tooltip.
Here’s how to add text by using the TEXT command:
Set an appropriate non-annotative text style current.
It’s possible to set an already created text style current at the TEXT command prompt, but it’s usually more straightforward to set the style before starting the command.
An alternative to opening the Text Style dialog box to make an existing style current is to click the Text Style drop-down list and choose the style there. Look for the Text Style drop-down list on the Annotation panel’s slideout (on the Home tab) or on the Text panel of the Annotate tab.
If you know the name of the text style that you want to use, begin typing it at the command line. The AutoCAD 2014 command line searches for text styles; they appear at the bottom of the command line window. When you see the one you want, just select it.
(Optional) Use the Object Snap button on the status bar to enable or disable running object snaps.
You may or may not want to snap text to existing objects. For example, you’d want to use a Center object snap to locate a letter or number precisely at the center of a circle. Make sure that you specify middle-center (MC) text justification to ensure that object snapping works perfectly.
On the Home tab’s Annotation panel, click the lower part of the big button labeled Text, and then choose Single Line from the drop-down menu to start the TEXT command.
Don’t click the upper part of the Text button. That action starts the multiline text command, mText.
If your text style is annotative and this annotative object is the first one you’re creating in this drawing session, AutoCAD usually displays the Select Annotation Scale dialog box, which advises you that you are indeed creating an annotative object and asks you to set the scale at which you want the annotation to appear; click OK to continue.
AutoCAD tells you the current text style and height settings and then prompts you to either select a starting point for the text or choose an option for changing the text justification or current text style first:
If you want a justification style different from the default (left), type J, press Enter, and choose another justification option.
Look up the term create single-line text in the online Help system if you need help with the justification options.
Specify the insertion point for the first text character.
You can enter the point’s coordinates from the keyboard, use the mouse to click a point onscreen, or press Enter to locate new text immediately below the most recent single-line text object that you created.
AutoCAD prompts you for the text height:
Specify the height of the text.
The text height prompt doesn’t appear if you’re using a text style with a fixed (that is, nonzero) height. Now here’s the nuisance: If you haven’t specified a fixed height for the current text style, you’ll be asked for the text height every time you create text, and you’ll have to enter the correctly scaled value to get things to come out right.
AutoCAD prompts you for the text rotation angle:
Specify the text rotation angle by typing the rotation angle and pressing Enter or by rotating the line onscreen with the mouse.
AutoCAD prompts you to type the text.
Type the first line of text and press Enter.
(Optional) Type additional lines of text, pressing Enter at the end of each line.
Each line of text is neatly aligned below the previous line and is a separate, independent object and cannot be edited as a single paragraph. If you want a single paragraph, use the mText command.
To stop entering text and return to the command line, press Enter at the start of a blank line.
AutoCAD adds to the drawing the new, single-line text object — or objects, if you typed more than one line.
The TEXT command remembers its last-used settings (style, justification, height, and rotation angle), so you don’t need to reapply them every time.
To align lines of text exactly, type all the lines in one instance of the TEXT command, pressing Enter after each line to make the next line appear immediately after it. Otherwise, aligning different lines of text precisely is more difficult (unless you set the snap just right or use a complicated combination of object snaps and point filters).
To edit single-line text after you create it, select the text, right-click, and choose Edit (or double-click the text) to open the In-Place Text Editor. (In-place simply means that you edit text at its exact size and location in the drawing.)
An in-place editing box highlights the selected text object, enabling you to edit the contents of the text string. If you want to edit other text properties such as text height, select the text, right-click, and choose Properties to display the Properties palette. Use this palette to change properties as needed.
If the Quick Properties button on the application status bar is enabled, clicking a single-line text object opens the Quick Properties panel, allowing you to change some (but not all) of the same properties as you can on the Properties palette.
Autocad Linetype Scale Commands
The Stretch command in AutoCAD 2014 is powerful: It can stretch or move objects, or stretch some and move others at the same time, depending on how you select them. The key to using Stretch is specifying a crossing selection box properly.
Begin with a drawing open in AutoCAD.
Autocad Won't Let Me Type Commands
On the Modify panel, click the Stretch button. It’s the one showing the corner of a rectangle being stretched.
The Stretch command starts, and AutoCAD prompts you to select objects. This is one of those times (and one of those commands) that requires you to watch the command line.
Follow the command line instructions to click points from right to left to define a crossing selection box.
The pointer changes to a dashed rectangle enclosing a rectangular green area, which indicates that you’re specifying a crossing selection box. The crossing selection box must cut through the plate and column in order for the Stretch command to work. You see the following:
If these drafting settings aren’t already set this way, turn off SNAP mode and turn on ORTHO and OSNAP. Then set a base point for the stretch operation.
This point serves as the base point for the stretch operation. As before, if you can’t get the crosshairs to snap to the endpoint, right-click the OSNAP button and select Endpoint.
Specify a displacement for the stretch operation.
AutoCAD prompts you at the command line:
Move the crosshairs horizontally to the right, type 6, and press Enter.
AutoCAD stretches the plate and column with its hatching, and moves the anchor bolts by the distance you indicated.
Enter Z A at the command line to see the entire drawing.
If the first stretch didn’t work properly, press Ctrl+Z and try again. Stretch is an immensely useful commandthat makes you wonder how drafters used to work with only erasers and pencils.
When the stretched drawing is as you want it, press Ctrl+S to save the drawing.
List Of Autocad Commands
After some drawing and editing, you may wonder how you’re supposed to know when to turn off or on the various status bar modes (Snap, Grid, Ortho, Object Snap, and others). Rest assured that you eventually begin to develop an instinctive sense of when they’re useful and when they’re in the way.
Autocad Type Commands Download
If a mode is in your way or you realize that you need one, you can click the buttons at any time while using the editing and drawing commands.